SANYO PLC-XW200 LCD Projector

Introducing the PLC-XW250 and the PLC-XW200 – that offer educators outstanding cost performance with an eco stand-by power mode that uses a mere 0.4 watts and their exclusive “Easy Setup Function”. These projectors are extremely easy to operate and offer advanced features such as wired LAN management – making them perfect for educators. Using a mere 0.4 watts, the PLC-XW250 and the PLC-XW200 are SANYO's most ecological data projectors. The eco power stand-by mode saves about 80% of the energy that is consumed by similar previous SANYO projectors*. By redesigning the electrical circuits, these two projectors are able to comply with the EuP-Directive Lot 6 and the EU RoHS Directive. As an additional environmental measure, all the packaging contains pulp molds, which can be recycled as used paper. Both projectors incorporate SANYO's latest “Easy Setup Function”, which include Auto Input Signal Search, Auto Vertical Keystone Correction, and an Input Guidance Function. The Auto Input Signal Search automatically detects the input signal and makes the necessary internal settings. The Auto Vertical Keystone Correction function automatically detects its position angle and corrects for any image distortion. And finally, the Guidance Function displays on-screen connection instructions when there is no input signal detected, enabling easy setup for expert users and novices alike. Using the supplied wired LAN terminal (RJ-45), the PLC-XW250 and PLC-XW200 can be controlled and managed via network connection. The LAN connection offers settings for power on/off, switching input signals, projecting from a remote location, as well as for monitoring lamp conditions and usage time. An automatic maintenance notification function sends notices to preset email addresses in the event of projector problems, resulting in faster maintenance response time. Using SANYO’s PJ Network Manager software, it's possible to centrally monitor operating conditions of up to 200 projectors on a single network, reducing multiple projector management time. Specifications : Brightness 2200 Lumens Resolution XGA (1024 x 768) Uniformity 85% Panel System 0.55” TFT Poly x 3 Number of Pixels 2,359,296 Contrast Ratio (Full on / off) 500:1 Image Size 40” - 300” Aspect Ratio 4:3 Projection Lamp (s) 220W UHP Scanning Frequency H 15 - 100kHz / V 50 - 100Hz Dot Clock 140MHz dB Rating 29dBA (eco mode) Voltage 100 - 240 V BTU Rating 723(eco) Power Consumption 212W (eco) Weight 5.5 lbs Dimensions (inch) 13.1 x 3.4 x 9.7 inch Projection Lens (inch) F 2.00 - 2.15 / f 0.72” - 0.87” Throw Distance (feet) 4.3’ - 38.7’ Zoom / Focus Manual Throw Ratio 1.62 - 1.92 Zoom Ratio 1:1.2 Up / Down Ratio 6:1 Power Lens Shift No Optional Lenses No Rear Screen Projection (L / R Reverse) Yes Ceiling Mountable (T / B Reverse) Yes Digital Keystone Correction V +/- 30°(Auto Keystone) Digital Zoom 16x - 1/4x Digital Interface (HDCP Compatible) No Analog Interface D-sub 15 pin, RCA USB Port No RS-232 Control Carry and / or D-Sub9 Speaker Output 1W Audio Output Stereo Mini (Variable) PC Monitor Output Yes PC-Less Presentation No Wireless Presentation No Network Control / Admin Yes Custom Startup Screen Yes Detachable Input Panels No Shipping Case No Remote Control IR Remote